Steady Check Engine Light
The light stays on even though the vehicle may appear to drive normally.
Mobile Check Engine
Light
Diagnosis & Repair
in Vancouver, WA
A check engine light means the vehicle has detected a fault—not simply a warning to clear. Depending on the cause, delaying diagnosis can lead to additional damage, a breakdown, or a more expensive repair.
Backed by automotive repair experience since 2017, we come to your location to identify the actual cause and handle the repair needed to correct it. Proper testing before parts are replaced helps avoid wasted time, unnecessary repairs, and the cost of replacing parts that were never the problem. You know the diagnostic service call price before the appointment, and no additional repair work begins without your approval.
Common Reasons to Request Check Engine Light Service
The check engine light may be the only sign of a problem, or it may appear with noticeable changes in how the vehicle runs.
Flashing or Blinking Light
The light flashes while the engine is running or while the vehicle is being driven.
Rough Idle or Shaking
The engine runs unevenly, vibrates, or feels like it is misfiring.
Hesitation or Loss of Power
The vehicle responds slowly, hesitates during acceleration, or no longer delivers normal power.
Intermittent or Returning Light
The light comes and goes, or it returned after codes were cleared or previous work was completed.
Failed Emissions Inspection
The vehicle did not pass an emissions inspection because the check engine light was on.
If another warning light appeared at the same time, mention it when you contact us.
How We Diagnose the Cause
Reading a diagnostic trouble code is only the starting point. A code identifies the system, circuit, or operating condition that detected a fault—it does not prove which part has failed.
Review the Fault Information
We check stored and pending codes and review the conditions recorded when the fault occurred.
Analyze Live Vehicle Data
We compare what the vehicle’s sensors and engine-control system are reporting while the engine is running.
Test the Related System
We test the sensors, ignition components, electrical circuits, wiring, and connections related to the fault instead of replacing a part based only on the code description.
Inspect for Physical Problems and Leaks
We inspect relevant components, hoses, and connections. Smoke testing is used to locate intake or EVAP leaks when the results indicate it is needed.
The exact testing path depends on the symptoms, fault information, and results found during the diagnosis. We identify the cause before recommending the repair.
What to Expect from Check Engine Light Service
-
01 — Tell Us What Is Happening
Send us the vehicle year, make and model, its location, how the check engine light behaves, and any other symptoms or previous work. We review the information and confirm the diagnostic service call and its price before the appointment.
-
02 — Diagnose the Cause and Approve the Repair
We test the vehicle based on the reported symptoms and the results found during the diagnosis. We explain the cause and provide the repair estimate before any additional work begins.
-
03 — Repair and Verify
After you approve the repair, we complete the work and perform the appropriate checks to verify that the original condition has been resolved.
Check Engine Light Diagnostic Service Call Pricing
Tell us how the check engine light behaves, what symptoms you notice, and any relevant diagnostic or repair history. Based on that information, we confirm which diagnostic service call applies and its price before scheduling the appointment.
Standard Diagnostic Service Call
$100
Sales tax applies
Standard on-site diagnosis based on the reported check engine light condition.
INCLUDES
- Inspection and diagnosis of the reported condition
- Fault-code, vehicle-data, and related system testing
- Clear explanation of the findings
- Repair estimate before repair begins
The diagnostic fee can usually be applied toward same-visit repairs.
Advanced Diagnostic Service Call
$250
Sales tax applies
Used when the symptoms or repair history indicate a complex, intermittent, or previously unresolved condition requiring extended testing.
INCLUDES
- Up to two hours of diagnostic time
- In-depth testing based on the symptoms, history, and initial results
- Clear explanation of the findings
- Repair estimate before additional time or a larger repair
Minor repair labor is included if the issue can be resolved within the diagnostic time.
Real Check Engine Light Repairs
Examples of vehicles we have diagnosed and repaired after the check engine light came on.
2019 BMW X3
- Customer Concern
- The check engine light and a drivetrain malfunction warning were on, and engine power was reduced.
- Diagnosis
- Testing identified the active grille shutter system (BMW Active Air Flaps) stuck in the closed position.
- Repair & Verification
- The failed active grille shutter assembly was replaced and correct operation was verified. The check engine light, drivetrain warning, and reduced-power condition were resolved.
2005 Mercedes-Benz C55 AMG
- Customer Concern
- The check engine light was on, and the vehicle had poor acceleration and a noticeable loss of power.
- Diagnosis
- Testing identified multiple intake air leaks and faulty fuel injectors.
- Repair & Verification
- The necessary intake components and faulty fuel injectors were replaced. Engine performance was restored and the check engine light remained off after verification.
2013 Toyota Tundra
- Customer Concern
- The check engine light was on, and the vehicle had entered fail-safe (limp-home) mode.
- Diagnosis
- Testing found that the secondary air injection pump was not operating and traced the fault to its electrical circuit.
- Repair & Verification
- The electrical circuit was restored and pump operation was verified. The check engine light and fail-safe condition were resolved.
What Customers Say About Our Check Engine Light Service
Rated 5.0 on Google based on 64 Google reviews.★★★★★
“The check engine light came on in my 2019 BMW X3 and I really didn't want to deal with the dealership. My neighbor gave me Alex's number and said he's a good mobile mechanic, so I decided to reach out. Alex came out to my place in Vancouver, WA, ran diagnostics, and quickly found the issue. It turned out to be the radiator shutters. He got the OEM parts and fixed everything without any hassle. The price was fair and the whole experience was straightforward and professional. Glad I got his contact, I'll call him again if I need help with the car.”
Petr Remizov
★★★★★
“Alex came out to my house and met with my fiancée to take a look at my car. He found the source of multiple issues in my car and fixed them overnight! Such great work for such a great price! I will recommend him to anyone who needs a mobile diagnosis and quick and efficient repair, he really knows his stuff and does great, professional work! My ca is running so great now :)”
Faith Duran
★★★★★
“I recently had some work done on my Audi and couldn't be more impressed with the quality of service I received. The attention to detail and professionalism were outstanding from start to finish. Alex knows these cars inside and out, and the results speak for themselves - everything was done to the highest standard. It's not easy finding someone you can truly trust with a premium vehicle, but this experience gave me complete confidence. Highly recommended for anyone who values quality, precision, and honest expertise!”
Andrew Marchuk
Check Engine Light FAQs
Can you diagnose the problem if the check engine light turned off?
Often, yes. Stored or pending fault codes and freeze-frame information may remain after the light turns off. Intermittent faults may require testing under the conditions in which the problem occurs or additional diagnostic time.
Can the repair be completed during the same visit?
Some repairs can be completed during the diagnostic visit when the cause is confirmed, the correct parts are available, and the work is suitable for the vehicle’s location. Repairs requiring additional parts, time, or shop equipment are arranged after the findings and price are explained.
What should I do if the check engine light is flashing?
A flashing check engine light should not be ignored. If the engine is shaking, running rough, or losing power, stop driving as soon as it is safe and contact us with the exact symptoms.
What if other warning lights are on too?
Tell us which warning lights or dashboard messages appeared and whether they came on at the same time. Some warning lights involve separate vehicle systems and may require a different diagnostic service.
Is the repair covered by a warranty?
Repairs completed by Lubomiroff Performance include warranty coverage under our published warranty terms. Coverage depends on the repair and the parts used.
GET STARTED
Ready to Fix the Problem Behind the Check Engine Light?
Send us the vehicle year, make and model, its location, how the check engine light behaves, and any other symptoms or known codes. We’ll review the information, confirm which diagnostic service call applies, and provide available appointment options.
If the vehicle requires a repair that cannot be completed at its location, we handle the repair at our shop. We arrange pickup and return the vehicle after the repair is completed and verified.
Serving: Vancouver, WA · Camas, WA · Ridgefield, WA · Portland, OR · Beaverton, OR · Hillsboro, OR · Cedar Mill, OR · Bethany, OR · Tigard, OR · Lake Oswego, OR · West Linn, OR · Happy Valley, OR · Milwaukie, OR · Clackamas, OR · Oregon City, OR · Troutdale, OR
VIEW FULL SERVICE AREA →